Kemo – M – Kemo M – 6A Solar Charge Controller/Regulator, 12V, 60Wp – This solar charging controller module can be connected between a 12V DC. Solar Charging Controller Module. Solar / Charging / Controller Module. Solar Charging Controller Module 12VDC A. Part No: KEMO M Kemo Electronic M Module, Solar Charge Controller: : Electronics.
LED displays for “accu full” approx. Alternatively use our Quotation page.
Solar Charging Controller Module [KEMO M] Communica Online
ksmo If the cable is longer or has a smaller cross section, respectively, the measuring keko of the battery voltage measurement will be changed due to the higher internal resistance of the cable. This will neither damage the accumulator nor the charging controller, but it causes a frequent charging interruption because a higher voltage is measured due to the additional line resistances and the smaller proximity to the solar cell, and the charging controller switches off earlier.
Questions Ask a Question Be the first to ask a question. Personal tools Log in. Do only connect solar cells up to a power of 60 W as current source! A power MOS transistor that iemo almost lossfree is used as circuit element.
Do not use stronger current sources and no transformers, battery chargers, accumulators, wind wheels, etc. The cross section of the cable between the charging controller and accumulator should be at least 1,5 qmm. The cable towards the solar cells may be of any length. This module is an electronic switch which switches on the connection to the solar cells if the accumulator is empty and switches off again when the accumulator keemo fully charged.
You may also like Strictly Necessary cookiesFunctionality cookiesPerformance cookies and Advertising cookies.
After wiring everything according to the drawing and description, the device is ready for operation. The longer the cable, the higher the line loss. When the accumulator is. Re-reeling orders placed after Reviews Write a Review Be the first to submit a review. Battery inrush voltage Approx. Unfortunately re-reeling is not available at the present time for this item.
Document Actions Send this Print this. The energy yield will be reduced this way. Connect a safety fuse 10 A in the lead between the accumulator and charging controller not enclosed!
Kemo M Solar Charger Regulator 12V 6A | Wiltronics
To use this facility please Sign In. The four different kemp of cookies are: The following applies here: The module is to be mounted as close as possible to the accumulator or groups of accumulators, respectively, to be charged ideal: