K8MM2 – read user manual online or download in PDF format. Pages in total : The content of this user’s manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user’s. ECS K8MM2(V) Computer Equipments Motherboard download pdf instruction manual and user guide.
After replacing the hard drive, boot into BIOS and select Choose replacement drive and rebuild to rebuild the broken array.
ECS K8M800-M2(V1.0) instruction manual and user guide
MC97 Modem Auto Enables and disables the onboard modem. Refer to the Utility Folder Installation Notes later in this chapter. Before using the Setup Utility, ensure that you understand the Setup Utility options. For some add-on cards, for example graphics adapters and network adapters, you have to install drivers and software before you can begin using the add-on card. Pull up the lever away from the socket and lift up to degree angle.
User Config mode Auto This item has the capacity to automatically detect all of the fllowing fieldsdefault values.
Installing Add-on Cards The slots on this motherboard are designed to hold expansion cards and connect them to the system bus. This RAID configuration provides data protection and increases fault tolerance to the entire system. Prices and specifications are subject to change without notice. New BIOS provides support for new peripherals, improvements in performance, or fixes for known bugs. The fail-safe defaults place no great demands on the system and are generally stable.
Press Y to use that hard drive to rebuild, or press N to cancel.
ECS K8MM2(V) Motherboard download instruction manual pdf
Leave this item at the default value for better performance. Best thing about this new service is that you are never placed manusl hold and get to talk to real repairmen in the US. I have freestanding Series 8 dishwasher.
Installing the Motherboard 14 Installation Procedure Refer to the following to install the memory modules. Place the motherboard over the mounting brackets and secure the motherboard onto the mounting brackets with screws. EXE that automatically detects your operating system before installation.
The motherboard complies with the specifications for the uATX mwnual case.
ECS > K8MM2 (V)
The drivers will be automatically installed. We recommend that you leave this item at the default value. Operation is subject to the following conditions: The third jack is for microphone.
Installing the Motherboard 10 Connecting Case Components After you have installed the motherboard into a case, you can begin connecting the motherboard components. If BIOS detects any disk drive failures or missing disk drives, the status of the array will be marked as broken. If you are running a Windows OS, these items are automatically updated whenever you make changes to the Windows Date and Time Properties utility.
Always go to the correct folder for the kind of OS you are using. Are you a Computer and Internet Expert? The switch should maintain contact for at least 50 ms to signal the power supply to switch on or off. Optimized Defaults Shutdown Temperature [Disabled] Enables you to set the maximum temperature the system can reach before powering down. Security Option Setup If you have installed password protection, this item defines if the password is required at system start up, or if it is only required when a user tries to enter the Setup Utility.
The disk drive software monitors the internal performance of the motors, media, heads and electronics of the drive. Connect the Serial ATA power cable to the power connector on each drive. Some hardware specifications and software items are subject to change without prior notice.
You might like to enable this item after you are confident that your system hardware is operating smoothly. Download and install the update packages from the Microsoft Download Center.
All others trademarks and copyrights mentioned herein are the property of their respective owners. Over-clocking components k8k800 adversely affect the reliability of the system and introduce errors into your system.
Leave this value at Auto and the system will automatically decide the fastest way to access the hard disk drive. Installing the Motherboard in a Case Refer to janual following illustration and instructions for installing the motherboard in a case. Related Question My ecs k8m m2 rev 2.