Get the guaranteed best price on Unpowered Stage Subwoofers like the JBL JRXS 18″ Compact Subwoofer at Musician’s Friend. Get a low price and free . Product Description. JBL JRX Sub Cover Bag. Convertible cover for JRXS – specially designed to protect your loudspeakers. A new, patent pending. The JBL JRX S is a passive subwoofer that has a clean sound in almost any room size. I would crank this subwoofer up in many different spaces and would.
It is just a more efficient way to transfer power and more reliable. These subs are built to take a beating; I still own mine and though I do not use it anymore I will never get rid of 11 because it symbolized how hard I use to have to work. You can leave all the FOH amps at home and sound better doing it. Adding another pair of JRX subs will help the low end a little, especially if you center cluster them in front of the stage.
When you put two 4 ohm subs together you’ll get a 2 ohm load. According the specs you should be able to run 2 subs off each channel.
This place is incredible.
Yep agree with Jwlusso. The advice you’ve been given is sound – theoretically the behringer amp will power 2 a side of those but you’d be much better off with a second GX5 actually, a GX3 is probably a better fit for those subs.
No amps, less weight, win all round. In my opinion, you can really do much better. I tested these boxes on a weekend instead of my Yamaha SW. Help FAQs Go to top. To summarize, the most are: And, if I hang another set of subs off this thru, what happens to the load? Please don’t take this personally, it is not a personal attack. If you analogize the load on the amp to to towing with a pickup truck, yeah, maybe you can tow two boats at once, but how long is the engine and transmission going to last with twice the stress?
The a reason folks use the number of poles to describe the connectors, rather than the number of wires, is because a two wire cable can be wired to a four pole NL-4 connector.
Maybe I’m way off base here, I’m still learning Cheap tools are damned expensive. Advertise on the most comprehensive and widely viewed musicians’ website. That was back in companies like Mackie where overcharging for quality subwoofers and it was hard to find one that was good without breaking your whole budget on one.
Hello, I am looking to add two more subwoofers to my PA setup. You feel well on the reggae and zouk – HP 4 ohms which requests the amp a little harder. You can get watts of peak power out of this woofer and at continuous use.
I know the QSC will not work on the 2 ohm load, but the Behringer says it will. Like him, i previously used JRX. I do watt power it all!
I’m thinking its a selectable full range or crossed over throughput selection but I’m not sure. What I am wondering 1118 could this through input be used to drive a 2nd sub on each side instead of one sub and one top?
I am wondering what speakon connection does what here is one input and one output? A pair of PRXs and a pair of PRXs will be louder, have much lower extension and generally sound better than your expanded system. Am I at 8 ohm now considering the cabs are 4 ohm each? Much easier on the back and your audience will be amazed at the difference in the sound. Not satisfied with those reviews?
It was tough to take at first but they really did help my band’s sound. I need a little help understanding the back plate of the sub I can’t seem to find anything int the manual or on jbls site NL-8 is rare, and you probably won’t see one.
Download the JBL JRXSP manuals for free – Hifi Manuals
That way, if we are on the road and one amp dies, we can still run on 2 amps and just lose 2 of the subs. When buying Speakon cables, you need to pay attention both to the series of connector being used as well as the number and gage of the wires in the cable. Join the HC Newsletter. If not you may need to remove the plate and switch some wires to pass the signal to correct pins of the speakon connector.
A wiser course of action, IMO.
Adding more JBL JRXS Subs to JBL JRX PA Setup | Harmony Central
This is the subwoofer line from JBL that originally made me fall in love with their subs in the first place, the JRX line of subs was a way to get a great sounding bass without having to spend a ton of money on a subwoofer. What are you using for a crossover? You will get a good quality piece of gear from them all of the time. If this is the case, Could I try using the behringer ep amp to drive the subs as it can run W at 2 ohms per channel and then use the 4 ohm QSC GX5 amp to power the tops.