48 × 96 mm. E5EN-H. For the most recent information on models that have been certified fo safety standards, refer to your OMRON website. [email protected] Digital Temperature Controllers. E5EN. Compact and Intelligent Temperature. Controllers. Depth of only 78 mm. Various temperature inputs: thermocouple, plati-. The E5CN, E5CN-U, E5AN, and E5EN are Digital Temperature Controllers. . It may represent the result of OMRON’s test conditions, and the users must.
Comments to this Manuals Your Name. Each press of this key decreases values displayed on the No. Each press of the parameters key advances to the next parameter. Match the communications specifications of the E5EN and the host computer.
This parameter independently sets the upper and lower limit alarm values when the mode for setting the upper and lower limits is selected for alarm 3 type initial setting level.
No patent liability is assumed with respect to the use of the information contained herein. CX-Thermo enables faster parameter set-up, easier device adjustment and simpler maintenance. Prepare a screwdriver that can be used on the lower front screw of the unit.
Omron Programmable Temperature Controller
These hardware settings are now set in parameters in setup omrn. Also, for safetytake countermeasures such as fitting fail safe installations. Revision History Revision History A manual revision code appears omrno a suffix to the catalog number on the front cover of the manual.
Y ou must be sure to follow the instructions provided in all safety precautions. The keys are used to switch between setup menus, and the amount of time that you hold the keys down for determines which setup menu you move to. Beginner to advanced level.
E5_N-H / E5_N-HT | Omron, Suomi
Page 89 Initial Setting Level Input type This parameter sets the sensor type by a corrensponding code. Level Description Heater current value monitor: Chapters Table Of Contents This gives faster, more precise heater control in rapidly changing, disturbance-sensitive applications.
Upper limit alarm value r5en Alarm 3 type must be set to e5ne and lower limits, upper and lower limit range or upper Lower limit alarm value e5n and lower limit alarm with standby sequence. Don’t show me this message again. Heating and cooling control Adjustment level Cooling coefficient When this parameter is changed, the set point upper limit is changed to the default.
Press The Or 4. Alarm 3 latch The alarm 3 function must be ON, and control must be standard control. For this reason, offset the readout value by 1 point or 2 point shift as described in this item. When the non contact temperature sensor model ES1A is connected to the E5EN, an offset of several to several tens of a degree can occur.
Kiitos Omron eNews -tilauksestasi.
CX-One software allows users to build, configure and program a host of devices such as PLCs, HMIs and motion-control systems and networks using just one software package with one installation and license number. Please use more than 6 characters. Email address Email error notification Password Please use more than 6 characters. To move to the advanced function setting level and calibration level, you must enter passwords.
This greatly reduces the complexity of the configuration and allows automation systems to be programmed or configured with minimal training. This parameter is for monitoring the manipulated variable on the control output 2 side during operation.
This feature enables you to ramp up to a set-point and set the dwell time period. Please log in or get direct access to download this document.
Event input assignment 2 Function Settings Observe the recommended mounting space limits. If the heating and cooling characteristics of the control target greatly differ, preventing satisfac tory control characteristics from being obtained by the same PID parameters, adjust the propor tional band P at the control output 2 side by adding the cooling coefficient to balance control between the heating and cooling sides.
PC based configuration and tuning software. For specifying control method Initial setting level Dead band: The parameter names in this list are listed in the order that they are displayed on the E5EN. Page Advanced Function Setting Level Manipulated variable display This parameter displays the manipulated variable. Standby sequence canceled point: IP Rating front panel.
Function Monitor Range Unit Power ON Protect level SV programmer and valve controller.