POCKET FADER. MIDI Control Box mit 16 Schiebereglern, MIDI Control Box with 16 Faders. nicht mehr lieferbar, no longer available. free shipping in the lower 48 states. great for mini set ups POCKET DIAL is a MIDI control box with 16 endless rotary encoders. This enables a jump-less. Does anybody use this for the OT? what about the relative cc´s? if you change patterns on the OT with different settings, how does it behave?.
In the MIDI spec we found no statement concerning this byte.
Please update your browser to use Reverb
In this case Pocket Dial does not “know” the absolute value of the parameter but transmits only the information data increment abbreviation: The main difference are diql additional bank buttons which allow fast switching between 4 succeeding presets. To realize jump-free changes there are 2 fundamental solutions: The “new” MIDI messages are: Pocket Dial will receive these data and check out if one of the controller numbers assigned to the 16 encoders doefer with one of these controller numbers.
If this applies the controller data value will be used as the new starting data for this controller of course the MIDI channel has to be the same too. Thanks picket the endless rotary encoders used in pocket Dial jump-free changes of parameters become true provided that some requirements are met.
Pocket Dial MIDI Control Box with 16 Rotary Encoders by Doepfer
This feature makes sense for Pocket Dial as it makes 64 “virtual” poket available 4 banks with 16 controls each. Switching from one bank to another calls up the previous 16 controller data for the new bank thus leading to jump-free changing of up to 64 parameters. If one operates the control for this parameter Pocket Dial will transmit 24 or 22 depending if the control was operated up or down.
Pocket Dial transmits absolute data.
All user reviews for the Doepfer Pocket Dial
The memory management is nearly the same as for Pocket Control and Pocket Fader. The DIP switch is set to preset no There is only a general Data increment Controller 96 decimal, resp.
The DIP switch at the rear panel determines the number of the first of these 4 presets. This problem can doepfre solved if the device controlled by Pocket Dial outputs the new values i.
For Pocket Control or Pocket Fader this feature would not make much sense as for these devices the absolute positions of the rotary potentiometers resp. Pocket Dial receives this new value and uses it as the new start value. If one operates the control for this parameter there will be a jump to 94 or 96 depending if the control was operated up or down. Pocket Dial receives these values and uses them as new starting values.
H means hexadezimal values. With the 4 bank buttons the presets 42, 43, 44 and doepfeg can be selected. After a program change of the device controlled by Pocket Dial parameter jumps will occur.