the control of up to 4 “room set-ups” of independent Automation Temperature control and Sound system saved in the scenario module, item F – 2 modules. F H LN 0 EN. 8 key multifunction control. BUS SCS. Physical configuration. Programming a scenario with the F item F or activate the ones saved in the scenario programmer MHN. Technical data. Power supply via SCS BUS: 27 Vdc. Operating.
It is completed with key covers with Up-Down silk-screen printing. All the devices connect each other using a 2 conductor cable, used for carrying information and the 27 Vdc power supply. For any further information about the cookies policy it is possible to read the whole document.
In flush mounted box; In Din switchboards; Wall mounted. Scenario control Device with pushbuttons to manage up to 4 different scenarios saved in the F Scenario module or in the MH Scenario programmer.
Vai a Toggle navigation.
Online catalogue Select one of the following items to display the product list: MyHome technical sheets With the data of all devices. Flush mounted actuator for rolling shutters Device with 2 internal interlocked relays to manage the motors of rolling shutters and electric shutters.
System composition In the system there are two types of device: It has 8 keys with backlit icons indicating the assigned functions; it can manage lighting, rolling shutter automation and scenario functions. Touch control This device, available in 2 or 3 modules, sends actuation and adjustment controls on touching the control surface. Light and automation guide 11,60 MB. Instruction sheets Technical sheet Cerca.
MyHOME_Up: rolling shutter and light automations
To connect the devices they must be Bus wired via non-polarised two-wire cable. The actuators that control the load must be connected also to the electrical mains.
Association of the device functions. Device with 2 internal interlocked relays to manage the motors of rolling shutters and electric shutters.
Bticino | BTI-HD
Device with capacitive sensor pushbuttons Each zone corresponding to a key is marked at the centre by a lit LED which varies in light intensity when touched. Control with IR bticinno Device with brightness and infrared sensor to manage the lighting as a function of the presence of people and the amount of natural light.
Glass control with capacitive sensors Device with capacitive sensor pushbuttons Each zone corresponding to a key is marked at the centre by a lit LED which varies in light intensity when touched. Available in versions with 2, 4 and 8 relays with 16A contacts and independent outputs.
This device is completed with key covers with silk-screen printing to be selected on the basis of the configured functions. The devices for light and rolling shutter Automation are installed in the same way as traditional devices. Controls, connected only to the Bus wire; Actuators, connected to the Bbticino wire and to the Vac power line to manage the connected load. This device, available in 2 or 3 modules, sends actuation and adjustment controls on touching the control surface.