This chapter describes the boards supported by the BSC The BSC UUP (UMTS RNC user plane processing). -. -. 2 GE. 2 GE. Home/Groups/Wireless Network Info Community. BSC e BSC RNC in Pool. Armetta Diamond (1) 4 years 6 months ago View: Reply: 0. Comment. This program provides thorough understanding of 3G Technology, product and hardware description of Huawei RNC , with their data.
Convention Description Boldface Buttons, menus, parameters, tabs, window, and dialog titles are huawi boldface. Context For details about huaei loading modes, see Loading Management.
Step 2 Power on the cabinet by referring to Powering On the Cabinet. Board status of other boards of Replace the faulty board and then reload the data to the same type is Normal, the new board. Prerequisite l All the subracks and boards are running normally. Italic Command arguments are in italics. The basic services consist of speech service and data service.
Click Scenario Management on the displayed tab page. The log-in dialog box is displayed, as shown in Figure One or more alarms are listed, Go to step Step 3. If the status remains abnormal, check the transmission links by referring to After all the information is automatically obtained, check whether the information is correct and enter the information that needs to be typed, as shown in Figure Step 4 Observe the device panel to check whether all the boards are in normal state.
The Abis juawei verification varies according hiawei the transmission mode over the Abis interface. Context l There are two ways to run the MML command script: The information returned is unused, Go to Step 6. You can choose either way according to your convenience. Conventions Symbol Conventions The symbols that may be found in this document are defined as follows. The USB disks are prepared. In addition, you can set the UE mode to Normal manually.
Format Description Key Press the key. Prerequisite l The standby board for the switchover operates normally. The connection is proper, Go to step 5.
BSC6900 Boards and its funtion
Compared with issue 04 of VRC00, this issue does not exclude any topics. Huaaei Requirements for equipment status before commissioning Item Requirement BSC hardware The hardware is installed and passes the hardware installation inspection and power-on check. Boldface Names of files, directories, folders, and users are in boldface. For example, you can type the following command and then press Enter.
Context There are two ways to verify the Ater interface: Click Upload on the right. If the value of UsageStatus is Faulty, check the transmission links by referring to Action Description Click Select and release the primary mouse button without moving the pointer.
Table lists the detailed information. The A interface verification varies according to the transmission mode of the A interface. No board related fault alarm Go to step 8.