Jet pipe for Panther /Aeronaut “SUPERLIGHT”: This jet pipe fits the Aeronaut Panther in combination with a Kolibri or P is made. For sale is my newly finished and unflown Aeronaut F9F Panther. This is an all composite kit with removable wings designed for 90mm EDF.
Quote message in reply? It was a light setup and had plenty of power. All servos are metal geared, with low profile aileron servos and a digital mini elevator servo. To quote Herbs post hence the down So I topped off the retracts air, and popped in a pack. Last edited by Downwind3Zero; Jul 05, at All markings are pressure sensitive decals that can be removed if you ever decide to repaint the plane in another scheme.
CG and Throws Thanks guys for areonaut input. Remember Me Forgot Password? I have also checked everything over ran the fan on 6 it seems to be fine. I was thinking sunday if everything worked out. You will need batteries, an ESC, motor, and a receiver to be ready to fly.
Still they do perform great. Well guys, today after work I got a chance to go out a grab a flight. The following errors occurred with your submission. Really as long as I can get to the flight line and have enough for say 6 minutes I good but they seem to be holding great now.
I hope the gear setup works well as I had to make a few adjustment to the modification to brace the gear plates.
F9F “Panther” for retracts (Aeronaut), ,00 €
For sale is my newly finished and unflown Aeronaut F9F Panther. Well I will try to get some photos and as always look for a video camera. Maiden on 6s Well guys, today after work I got a chance to go out a grab a flight. All control surfaces are live hinged with heavy duty phenolic servo horns attached using Aeropoxy.
Jul 11, Images View all Images in thread Views: I am including the remainder of the aeronayt Aeronaut decals along with all original documentation and the uncut thrust tube.
Aero-Naut Panther F9F-Gliders Distribution
As I banked and started to build speed the down was to much so I had to pull back the down trim and basically only one click of down pajther was need upon landing. I have replaced the stock hardware with heavier-duty and better quality stuff including new linkages, connectors, and all hex head bolts.
I have down what you guys have said and made sure about the rates on the controls. If not satisfied I will up the cells to 8 and then give it another go. Maiden I was thinking sunday if everything worked out.
Pantner I hope to be able to launch next weekend. Hey Jeff what day? Well, recommend your CG, your rates and trim on the tail you used for final flight based on your CG location. This airplane is designed for a bungee launch and belly landing, although Spring Air retracts can easily be fitted to the plane for ROG flights if need be. But everything seems pretty solid, so ROG is going pajther happen. The airplane is completely built with all servos and linkages installed and set up.
I had double the throw needed on everything and it was abit of a handful to not overcontrol it pantuer the maiden flight. So what are you bringing out? I have a new toy to show you. Ready for a Maiden I have down what you guys have said and made sure about the rates on the controls.
Last edited by rongreg13; at Here is a breakdown of what all is included: AirPower 90mm EDF unit. May 08, This is an all composite kit with removable wings designed for 90mm EDF. I flew mine with Midi-pro, Kontronic on 6S. Well I hope to see you at prado.
aerohaut It is an outstanding airframe. My original one flew great on WATTs. Jul 05, I think it flys very scale on this 6s setup. This thread has most of the info Just would like more speed and maybe less pitch.